SANITARY TEMPRESS TEMPERATURE GAUGE

Thermometer

Tempress-Temparature-Gauge

Application

The function is based on expansion of the filling medium in the closed sensor. The change of pressure actuates the spiral spring driving the movement. A built-in bimetallic coil compensates automatically for the effect on the reading caused by change of the ambient temperature.

Specifications:

Thermometer A8103 – polished
Case: size DN100
Material Stainless Steel
Liquid filling Silicone filling
Neck 50mm(1.75”)
Connection clamp DN38 (0.8”) or DN51 (0.5”)
Acc. To ISO 2852
Sensor diameter: 10mm (0.4”) or 13mm (0.5”)
Max. L 560mm
Material AISI 316 surface finish
A8103 Ra<0.8um (32u in.)
Optional: Ra<0.5um (<20u in.)
Filling media Inert gas
Measuring range -40oc TO +250oC *-40+480oF)
Minimum span 60oC (140oF)
Accuracy EN13190, cl.1
Ambient Temperature -40-+400oC
(-40-+212oF (or FS))

SANITARY TEMPRESS PRESSURE GAUGE

Pressure Gauge

Tempress-Pressure-Gauge

Application

The pressure gauge with diaphragm seal is an ideal solution in situations where the medium is not to come in contact with the instrument´s measuring system whether for reasons of hygiene or due to the thick, crystallising or polluted nature of the medium.

 

Specifications

Type A330301… Pressure gauge w. diaphragm seal
Case size DN100
Case material AISI 316, glass-bead blasted
Display face Acrylic
Bezel AISI 316
Liquid filling Glycerine
Connection 1.5” (DN 38) clamp acc. To ISO 2852
Material AISI 316L
Diaphragm material AISI 316L
Transmission fluid Glycerine, 90/10
Measuring range -1~0 bar to 0~100 bar
Minimum span 1 bar
Damping Standard
Over range protection Pmax + 30%
Medium temperature – 5oC to 130oC (23-265oF)
Ambient temperature Span £2,0 bar 0~50oC (32~120oF)
Span £2,0 bar 0~60oC (32~150oF)
Accuracy Class 1,0 (±1 % af FS)
Temp. dependence 60 mbar at 100oC (0,87 psi at 212oF)

 

SANITARY SCREEN GASKET

Screen Gasket

Application Fluid filtration screen gaskets are designed to be interchangeable with standard clamp gasket.
Rubber Material FKM Fluoroelastomer, EPDM, Platinum Silicone, Buna, PTFE (fluoropolymer)
Perforation Type .033″, .045″, .062″, .094″, .125″,.187″ and .250″ standard
Wire Mesh Type 10, 20, 40, 60 & 100 (other mesh upon request)
Size 0.5” ~ 6”

SANITARY ANGLE FILTER 90 Deg

Angle Filter

Application To filter out particle and unnecessary solid in process line
Body Material Stainless Steel 304 or 316L
Rubber Material EPDM or Silicone
Filter Cartridge With 0.5mm ~ 5mm holes
Filter Wire Mesh From 20 mesh to 500 mesh
Size 1″ ~ 4″ weld end

Clamp end upon request

SANITARY TANK SIGHT GLASS WELD ON

Weld-on Tank Sight Glass

Application For observation of internal condition of a normally

closed tank or container

Body Material Stainless Steel 304 or 316L
Glass Material Tempered glass
Rubber Material EPDM or Silicone
Working Pressure Maximum 10 bar
Working Temperature -10°C to 135°C (EPDM),

-10°C to 180°C (Silicone)

Size 2″ ~ 4″

SANITARY RELIEF VALVE

Air Relief Valve

Application To prevent vacuum or change of pressure occurred in a tank
Body Material Stainless Steel 304 & 316L
Type A-40 – Two-way (pressure and vacuum) with oil bath working, maximum flow 300 hl/h

A-50Two-way (pressure and vacuum) with oil bath working, maximum flow 1000 hl/h