JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

OLIVER 2 WAY VALVE MANIFOLD, TYPE G12MFS/75-IN

The ‘G12’ Type 2 valve manifold is designed for remote mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve head is designed for safe and reliable isolation, giving bubble tight shut off, with non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

 

 

BRAND :  OliverValves

NAME: Oliver 2 Valve Manifold (Block & Bleed)

TYPE: G12MFS/75-IN

G12MF – Male x Female

SIZE:  3/4″ MALE NPT x 1/2″ FEMALE NPT

 

DESCRIPTION:

· Non rotating tip – self centering & anti-galling
· Piston ring – gives dynamic adjustment of gland seal in response to pressure change
· Anti-blow out spindle – a major safety feature
· Secure seal – precision machined to give leak free operation for the life of the valve.
Available in either PTFE or graphite foil.

 

In addition to the standard isolation needle valve, Oliver Valves can provide small manifolds specifically for gauge isolation.

The gauge valve comes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, as standard, are rated to 413bar (6,000psi), but can be rated at 689bar (10,000psi) and are available in a range of different materials.

We offer a variety of different Gauge valves, including:

  • Two Valve Manifolds
  • Gauge Bleed Needle Valves
  • Gauge Vent Valves
  • Gauge Multiport Valves

Our Two Valve Manifolds with female x female connections are suitable for wall mounting and bottom venting. The valves will operate up to 6,000 psi. Different materials and a variety of options are available to suit your requirements.

Our Gauge Bleed Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.

Our Gauge Multiport Valves are supplied with one male inlet and three female outlets. The valves will operate up to 6,000 psi and inlet lagging extensions are available.

Our Gauge Vent Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.

 

Gauge Valve Specifications:
PSI Rating 6,000 PSI Standard – Up to 10,000 PSI (depending on model/type)
End Configurations Single isolate valves with a bleed port, to Block and Bleed
Tips Non rotating tip – self centering & anti-galling
Ring Piston ring – gives dynamic adjustment of gland seal in response to pressure change
Spindle Anti-blow out spindle – a major safety feature
Seal Precision machined Secure Seal – available in either PTFE or graphite foil

 

REMOTE MOUNTING 2 VALVE MANIFOLD; MANIFOLD TYPE:G12MF MATERIAL:316 STAINLESS STEEL STANDARD VALVE SIZE: 1/2″ RATING:6,000 PSI IN PORT NPT: 1/2″ MALE OUT PORT NPT: 1/2″ FEMALE VENT NPT: 1/4″ FEMALE NA: NACE MR-01-75

Mfr. Part#:G12MFS-LTBNA

Overview
The ‘G12MF’ Type 2 valve manifold is designed for remote mounting to static pressure transmitters. The angled heads allow for panel mounting and the seperate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve is designed for safe and reliable isolation, giving bubble tight shut off, non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give a long service life in a variety of applications.Standard Specification
Pressure: 6000psi Temp: 240 deg C Show Graph
Packing: PTFE Thread form: NPT Handle: T-Bar
Seat: Metal to Metal Bore: 0.21″ (5.4mm) CV: 0.46
Connections: 1/2″ Inlet/Outlet & 1/4″ NPT VentKey Features
Non rotating tip – self centering & anti-galling
Piston ring – gives dynamic adjustment of gland seal in response to pressure change
Anti-blowout spindle – a major safety feature
Secure seal – precision machined to give a leak free opertion for the life of the valve. Available in either PTFE or GrafoilProcess Valve: Needle
Orifice Size: 0.21”
Maximum Temperature Rating: 464 Deg F
Vent Valve: VP50S
Maximum Pressure Rating: 6000 psi @ 100 Deg F
Packing Material: PTFE
Body Material: 316 Stainless Steel

 

 

 

 

JUAL OLIVER 5 VALVE MANIFOLD Y53S

Oliver Valve 5 Valve Manifold

 

In addition to the standard isolation needle valve, Oliver valves can provide 2, 3 and 5 valve manifolds for both remote and direct mounting to pressure gauge and pressure differential transmitters. These manifold valves are, as standard rated to 413bar (6000psi) and are available in a range of different materials. Our Needle Valve Manifolds are available in numerous different configurations – including pipe-to-pipe, pipe-to-flange and flange-to-flange.

To date, our needle valve manifolds have been used all over the world on both small scale and large scale Oil, Gas and Petrochemical projects.

Our customers also benefit from our Needle Valve Manifolds being supplied with mounting bolts and seal rings. In the past, customers have used our Y34 and YV34 manifolds to mount onto Rosemount transmitters and other applications. As with most of Oliver Valves’ range of Needle Valves, we are able to work closely with our customers to design and engineer bespoke manifolds that fit into both new and existing projects.

 

Oliver Valve ‘Y53’ Type 5 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation and vent for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble tight shut off, with non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.We typically keep 5 valve manifolds in stock.

Needle Valve Manifold Specifications:
PSI Rating Rated to 4,800 PSI as standard.
Configurations Pipe-to-Pipe, Pipe-to-Flange and Flange-to-Flange
Valve Configurations Two Valve, Three Valve and Five Valve configurations
Mounting Options Both remote and direct mounting available

Key Features

 

– Non rotating tip – self centering & anti-galling
– Piston ring – gives dynamic adjustment of gland seal in response to pressure change
– Anti-blow out spindle – a major safety feature
– Secure seal – precision machined to give leak free operation for the life of the valve. Available
in either PTFE or Grafoil

Standard Specification

 

Pressure: 4800psi
Temp: 240 deg C
Packing: PTFE
Seat: Metal to Metal
Handle: T-Bar
Bore: 0.21″ (5.4mm)
CV: 0.46
Connections: 1/2″ Inlets
Supplied with 4x M10 bolts (7/16″UNF also available) and 2x PTFE/Grafoil seal rings

 

Key Features

  • Non rtation tip – self sentering and anti-galling
  • Piston ring – gives dynamic adjustment of gland seal in repsonse to pressure change
  • Anti-blow out spindle – a major safety feature
  • Secure seal – precision machined to give leak free operation for the life of the valve

 

Direct mounting five valve manifolds manufactured from 316 stainless steel. The five head units are of the inside screw and rising stem design, screwed and pinned bonnet with adjustable PTFE gland packing.

• T-bar handle operation
• Non-rotating tip giving metal-to-metal hard seat.
• The maximum pressure rating is 6,000 psi with the maximum temperature rating being 240 ºC at reduced pressure.
• Female inlet connections as Standard.
• Vent is 1/4” NPT unplugged.
• Flanged 54mm centres oulet connections as Standard.

 

Specifications:

  • 1/2″ Female NPT X 1/2″ Flange
  • Max Pressure 4,800PSI
  • 2 Mounting holes to mount bracket
  • 316 Stainless Steel Material
  • Metal to Metal Seat
  • PTFE Packing
  • NACE MR-01-75 latest revision