HYLOK NEEDLE VALVE 1/2″ OD 6000Psi

HYLOK NEEDLE VALVE 1/2″ OD 6000Psi GRAPHITE PACKING,

PN: NV3H-8T-G

 

Product Details

Additional Information  –
Dimension D (mm) 13.50
Dimension L (mm) 72.00
Dimension L1 (mm) 36.00
Series NV
Dimension L2 (mm) 36.00
Dimension L3 (mm) 36.00
Body Material Stainless steel 316
Quality System Certificates ISO 9001 Certificate No. GQC 212, ASME Sect II (MO) Certificate No. QSC 584
Dimension E (mm) 13.00
Dimension H (mm) 63.60
Dimension C (mm) 49.00
Flow Coefficient (Cv) 0.7
Pressure Rating (psi) 1000, 2000, 3000, 4000, 5000
Pressure Rating (bar) 344, 69, 138, 206, 275
Temperature Rating (ºF) -65 to 600, 450
Temperature Rating (ºC) -54 to 315, 232
Packing Material Graphite Packing
Stem Tip Vee (Standard), Regulating, Soft Seat with Kel-F
Dimension F (mm) 50.00
Inlet End Connection 1/2″ Hy-Lok
Orifice (mm) 6.30
Outlet End Connection 1/2″ Hy-Lok
Body Pattern Straight Pattern (Standard), Angle Pattern
Dimension F₁ (mm) 64.00
Dimension G (mm) 20.00
Handle Without (Standard), Black Phenolic Knob, Black Aluminum Bar
Sour Gas Without (Standard), NACE MR-01-75

 

 

 

 

JUAL HYLOK MALE CONNECOR 12mm OD x 3/8in MALE NPT

HYLOK MALE CONNECOR 12mm OD x 3/8in MALE NPT

 

 

 

Specifications 

Dimension D

9.9 mm

Dimension H (Hex)

22.2 mm

Dimension h (Hex)

20.6 mm

Dimension L

51.6 mm

Dimension L1

38.9 mm

Material

316 Stainless Steel

Series

FMC

Standard

SAE J514(070102)

T (NPT)

3/8 in

Thread Type

Parallel Thread ASME B1.1 (Unified)
Parallel Thread BS 2779 (BSPP), ISO 228/1

Taper Thread ASME/ANSI B1.20.1 (NPT)

Taper Thread BS 21 (BSPT), ISO 7/1

Tube O.D.

12.0 mm

Unified National Fine Thread (U)

3/4″-16

 

 

 

 

 

 

SURABAYA TEKNIK JUAL MALE CONNECTOR HYLOK SWAGELOK FITOK

 

JUAL MALE CONNECTOR HYLOK ST

 

JUAL HYLOK MALE CONNECTOR ST

 

JUAL SWAGELOK FITOK SUPERLOK HYLOK FITTINGS ST

 

JUAL HYLOK MALE CONNECTOR

JUAL HY-LOK NEEDLE VALVES

 

 

Hy-Lok needle valves offer secure, leak-free connections and provide the lowest overall cost of any instrument needle valve used in the market today.

Needle valves within a block and bleed function help achieve positive isolation within maintenance operations of a live process plant. These work well in non-critical processes like with non-hazardous fluids or a low pressure system.

The small port and needle-shaped, threaded plunger allows for precise flow regulation in low flow applications. Not only for maintenance, needle valves also work well in flow-metering operations, and are especially good at maintaining a calibrated and constant low flow rate.

Rugged and compactly designed, Hy-Lok offers a wide range of sizes (1/8″ to 1″), and stem tips (v-stem, regulating, and soft seat) that work well for a variety of applications, including hydraulic and pneumatic systems. Of 316 stainless steel as standard, and some as alloy 400, Hy-Lok needle valves are meticulously designed for the flow, temperature and system required.

Rugged and compactly designed, Hy-Lok offers a wide range of sizes (1/8″ to 1″), and stem tips (v-stem, regulating, and soft seat) that work well for a variety of applications, including hydraulic and pneumatic systems.

Of 316 stainless steel as standard, and some as alloy 400, Hy-Lok needle valves are meticulously designed for the flow, temperature and system required.

End connection options include male / female NPT, Hy-Lok tube fittings, and ISO threads from 1/8″ to 1″. Available in stainless steel, carbon steel, brass, and alloy 400. With pressure rating to 10,000 psi and temperatures up to 1,200°F, Hy-Lok has a needle valve solution to meet your needs.

SV Series Integral Bonnet Bar Stock Needle Valves

spacer
Check up to five results to perform an action.
spacer
spacer
  • Pressure rating up to 6,000 psi (413 bar) at 100°F (38°C).
  • Temperature rating from -65°F to 450°F (-54°C to 232°C) with standard PTFE packing, and up to 600°F (315°C) with optional PEEK packing.
  • Compact and rugged body design.
  • Body is made of extruded bar stock and available in straight and angle patterns.
  • Variety of stem tips include vee tip standard, regulating, and soft seat with PCTFE as an option.
  • Size range from 1/8″ thru 1/2″ tubing and piping.
  • Variety of end connections include Hy-Lok tube fittings, male/female NPT and ISO threads.
  • Body Material is available in 316 stainless steel and alloy 400.

 

 

 

 

 

 

 

 

 

 

 

 

Applications

Test Valves, Pilot Plants
Research Laboratories

Features

In-Line or Angle pattern
Stainless Steel, Brass, Alloy 400(Monel)
PTFE packing provides leak tight seal
and long life cycle
Metal-to-Metal Seat or PCTFE Soft Seat(Bubble Tight)

Specifications

– Maximum Operating Pressure :
6000 psig(420 barg) @ 100℉(38℃)
– Operating Temperature Range :
-65℉(-54℃) to 450℉(233℃)

 

spacer

Part No.

spacer

Flow Coefficient (Cv)

spacer

Inlet End Connection

spacer

Outlet End Connection

spacer

List Price

SV1F-4N-S316 0.37 1/4″ Female NPT 1/4″ Female NPT QUOTE spacer
SV1F-4R-S316 0.37 1/4″ Female ISO 1/4″ Female ISO QUOTE spacer
SV1M-4N-S316 0.37 1/4″ Male NPT 1/4″ Male NPT QUOTE spacer
SV1MF-4N-S316 0.37 1/4″ Male NPT 1/4″ Female NPT QUOTE spacer
SV1MH-4N4T-S316 0.37 1/4″ Male NPT 1/4″ Hy-Lok QUOTE spacer
SV1H-4T-S316 0.37 1/4″ Hy-Lok 1/4″ Hy-Lok QUOTE spacer
SV2F-6N-S316 0.73 3/8″ Female NPT 3/8″ Female NPT QUOTE spacer
SV2F-8N-S316 0.73 1/2″ Female NPT 1/2″ Female NPT QUOTE spacer
SV2F-8R-S316 0.73 1/2″ Female ISO 1/2″ Female ISO QUOTE spacer
SV2MF-6N-S316 0.73 3/8″ Male NPT 3/8″ Female NPT QUOTE spacer
SV2MF-8N-S316 0.73 1/2″ Male NPT 1/2″ Female NPT QUOTE spacer
SV2MF-12N8N-S316 0.73 3/4″ Male NPT 1/2″ Female NPT QUOTE spacer
SV2MH-6N8T-S316 0.73 3/8″ Male NPT 1/2″ Hy-Lok QUOTE spacer
SV2H-6T-S316 0.73 3/8″ Hy-Lok 3/8″ Hy-Lok QUOTE spacer
SV2H-8T-S316 0.73 1/2″ Hy-Lok 1/2″ Hy-Lok QUOTE

 

 

 

 

 

 

 

 

 

 

 

NV Series Integral Bonnet Needle Valves

spacer
Check up to five results to perform an action.
spacer
spacer
  • Pressure rating up to 5,000 psi (340 bar) at 100°F (38°C).
  • Temperature rating from -65°F to 450°F (-54°C to 232°C) with standard PTFE packing, and up to 600°F (315°C) with optional PEEK packing.
  • Integral bonnet with one piece body is available with straight and angle patterns.
  • Panel mounting nut allows easy mounting standard.
  • Variety of stem tips include vee tip standard, available regulating, and soft seat with PCTFE as an option.
  • Size range from 1/8″ thru 3/4″ tubing and pipe.
  • Variety of end connections include Hy-Lok tube fittings, male/female NPT and ISO threads.
  • Standard and stocked in 316 stainless steel, brass and alloy 400.

 

 

 

Applications

Instrument Isolation, General service Test Standard

Features

In-Line or Angle pattern
Stainless Steel, Brass,
Alloy 400(Monel), A105
PTFE 2-piece chevron stem packing
Metal-to-Metal Seat or PCTFE Soft Seat (Bubble Tight)

Specifications

– Maximum Operating Pressure :
5000 psig(350 barg) @ 100℉(38℃)
– Operating Temperature Range :
-65℉(-54℃) to 450℉(233℃)

 

 

 

GB Series Union Bonnet Valves

spacer
Check up to five results to perform an action.
spacer
spacer
  • Pressure rating up to 6,000 psi (413 bar) at 100°F (38°C).
  • Temperature rating from -65°F to 450°F (-54°C to 232°C) with standard PTFE packing, and up to 1,200°F (648°C) with optional Grafoil packing.
  • Union Nut design ensures safety.
  • Panel mounting nut standard sizes.
  • Variety of stem tips include non-rotating vee stip standard, with optional ball, soft seat and regulating tip available.
  • Size range from 1/8″ thru 1″ tubing and pipe.
  • Variety of end connections include Hy-Lok tube fittings, male/female NPT and IS threads. Tube and pipe socket weld available.
  • 316 stainless steel and alloy 400 standard, special alloys available.

 

 

 

 

 

 

 

 

 

 

 

 

Applications

Handling corrosives
High temperature and pressure
Radioactive and hot condensates

Features

In-Line or Angle pattern
Stainless Steel, Alloy 400(Monel), A105
High temperature grafoil packing
Metal-to-Metal Seat
Back seat stem for safety

Specifications

– Maximum Operating Pressure :
6000 psig(420 barg) @ 100℉(38℃)
– Operating Temperature Range :
-65℉(-54℃) to 1200℉(649℃)

 

 

SVH Series High Pressure Bar Stock Needle Valves

 

 

 

  • Pressure rating up to 10,000 psi (689 bar) at 100°F (38°C).
  • Temperature rating from -65°F to 450°F (-54°C to 232°C) with standard PTFE packing, and up to 600°F (315°C) with optional PEEK packing.
  • Metal seal body-to-bonnet.
  • Rugged body is machined from barstock with straight pattern standard, angled pattern optional.
  • Size range from 1/4″ thru 3/4″ tubing and pipe.
  • Compact design with orifice from 0.125″ to 0.2″ (3.2mm to 5.0mm).
  • Variety of stem tips includes non-rotating vee stip standard, optional ball tip available.
  • Variety of end connections include Hy-Lok tube fittings, male/female NPT and ISO threads.
  • Body Material is available is 316 stainless steel standard.

 

 

 

Applications

Instrument Isolation, Gas, Vapor or Liquid

Features

In-Line pattern
Stainless Steel, Alloy 400(Monel), Duplex
PTFE packing provides leak tight seal
and long life cycle
Metal-to-Metal Seat or PCTFE Soft Seat(Bubble Tight)

Specifications

– Maximum Operating Pressure :
10000 psig(700 barg) @ 100℉(38℃)
– Operating Temperature Range :
-65℉(-54℃) to 450℉(233℃)

 

 

 

RP Series Rising Plug Valve

  • Pressure rating up to 6,000 psi (413 bar) at 100°F (38°C).
  • Temperature rating from -20°F to 250°F (-29°C to 121°C) with PCTFE seat standard, and up to 400°F (204°C) with optional PEEK seat.
  • Stem seal to keep actuation threads clean.
  • Non-rotaing stem tip minimizes seat wear-out.
  • Robust body design with safety bonnet locking plate.
  • Orifice in straight flow path ensures max CV.
  • PCTFE seat standard, PEEK available.
  • Sour gas service available.
  • Gauge port option available.
  • Variety of end connections include male/female NPT, ISO, BSP threads and female Hy-Lok tube fittings.
  • Body Material is available is 316 stainless steel standard.

 

 

 

Applications

Sour gas service
Handling slurries or solid impurities

Features

In-Line pattern, Bi-direction flow
Stainless Steel, Brass, Alloy 400(Monel)
High flow capacity
Delrin, PEEK or PCTFE seats
Replaceable O-Ring Seal and Soft Seat
Gauge Ports available

Specifications

– Maximum Operating Pressure :
6000 psig(420 barg) @ 100℉(38℃)
– Operating Temperature Range :
Delrin Seat :
-20℉(-29℃) to 250℉(122℃)
PEEK Seat :
-20℉(-29℃) to 400℉(205℃)

 

 

 

TG Series Toggle Valve

 

  • Maximum working pressure up to 450psig (31bar)
  • Quick opening and closing
  • Manual and pneumatically actuated type
  • Straight, angle patterns
  • 316 stainless steel and brass body construction
  • 100% factory testedIntroduction
    Hy-Lok’s Toggle Valves are designed for quick acting and positive on-off control of media in moderate pressure and temperature applications.Features
  • Black Nylon Handle standard.
  • Pneumatic actuation.
  • Choice of Hy-Lok tube fitting, female NPT and male NPT end connections.
  • Orifice Range – from 0.080 to 0.250 in.(2.0 to 6.4 mm).
  • Panel mounting available.

 

Applications

Test Valves / Pilot plants

Features

Compact Design
Ensure safe relief of system pressure
Valve vent line pressure to atmosphere

Specifications

– Maximum Operating Pressure :
300 psig(20 barg) @ 100℉(38℃)
– Operating Temperature Range :
-20℉(-28℃) to 200℉(93℃)

 

 

 

 

 

 

BLV Series BLEED VALVES

 

  • Pressure rating to 10,000 psi (689 bar) at 100°F (38°C).
  • Temperature rating from -65°F to 850°F (-54°C to 454°C) with stainless steel, from -20°F to 450°F (-29°C to 232°C) with carbon steel, and from -65°F to 500°F (-54°C to 260°C) with alloy 400.
  • Back stop screw prevents accidental removal of stem.
  • Stem thread and tips are chrome-plated for maximum service life.
  • Size range from 1/8″ to 1/2″ tubing and pipe.
  • Variety of end connections include Hy-Lok tube fittings, male/female NPT and ISO threads.
  • Body Material is standard in 316 stainless steel.

 

 

 

 

PV Series PURGE VALVES

 

  • Pressure rating up to 4000 psig (275 bar) for 316 stainless steel and up to 3000 psig (206 bar) for Carbon Steel and Brass at 100°F (38°C).
  • Temperature rating from -65°F to 600°F (-54°C to 315°C) with Stainless Steel from -65°F to 400°F (-54°C to 204°C) with carbon steel, from -20°F to 350°F (-29°C to 177°C) with brass.
  • Vent hole is bleeds excessive liquid or gas from system lines.
  • Knurled cap is crimped to valve body for prevents accidental remove from body.
  • Size range from 1/8″ thru 1/2″ tubing and piping system.
  • Variety of end connections including Hy-Lok tube fittings, male/Female NPT and ISO, SAE threads.

 

JUAL HY-LOK TUBE FITTINGS

 

 

Tube Fittings
Hy-Lok double ferrule compression tube fittings provide leak-free performance for the most demanding applications. Our tube fittings are commonly used throughout the oil and gas, pulp & paper, petro-chemical/chemical processing, research laboratories, aerospace and defense, chemical processing, power generation, cryogenic and semiconductor, shipbuilding and heavy industrial industries.

Hy-Lok tube fittings are available in a variety of configurations and sizes that fulfill the need for leak-free gas and fluid containment.

Hy-Lok Tube Fitting Features

  • Low torque assembly
  • Positive leak free seal assembly and reassembly
  • Standard materials include 316 stainless steel, brass and Monel; others available upon request
  • Heat code traceability for 316 stainless steel and Alloy 400
  • Size range from 1/16” thru 2” (2mm thru 38mm O.D.tubing)
  • Variety of end connections and patterns.
  • Hydraulic swaging tools (EZY-MAT) are provided for easy installation

 

Applications

Instrumentation,
High pressure and Temperature,
Cryogenic service

Features

Compression type double ferrule design
Stainless Steel, Brass, Alloy 400(Monel), Duplex
Complete Interchangeability
Gaugeability
Vibration resistance
Excellent make and re-make life

Specifications

– Maximum Operating Pressure :
9000 psig(620 barg) @ 100℉(38℃)
– Operating Temperature Range :
-325℉(-198℃) to 1200℉(648℃)

 

Two ferrule tube fittings are designed and manufactured to meet the rigorous specifications required of industrial applications. Hy-Lok tube fittings are commonly used throughout the oil and gas, pulp & paper, petro-chemical/chemical processing, research laboratories, aerospace and defense, chemical processing, power generation, cryogenic and semiconductor, shipbuilding and heavy industrial industries.

Available in numerous configurations and sizes, our tube fittings are made up of four parts consisting of a body, front ferrule, back ferrule, and nut. Outstanding leak-tight connections are consistent as the two-ferrule design compensates for any tolerances in tube outer diameter, wall, thickness, and material hardness.

Hy-Lok tube fittings feature a low torque assembly and positive leak free seal for easy assembly and reassembly. During installation the mechanical properties of the tubing are maintained because the back ferrule moves in a controlled manner that does not stress or reduce the inner diameter of the tubing. Since the front ferrule does not force the body to expand the nut can be backed off easily for disassembly and remakes.

Constructed of standard materials including 316 stainless steel, brass, and Monel, other materials such as duplex stainless steel, titanium, and carbon steel are available upon request. Heat code traceability for 316 stainless steel and Alloy 400 assures the ratings and quality of each fitting and accounts for code requirements.

Fitting size range from 1/16″ thru 2″ (2 mm thru 38 mm O.D.tubing) with numerous choices in end connections and patterns. They are rated to the maximum working pressure of the recommended tubing.  Hydraulic swaging tools (EZY-MAT) are provided for easy installation.

Hy-Lok tube fittings are manufactured to Hy-Lok’s stringent quality control program and standards which assure the highest quality available in the industry. We are a global industry leading provider of fitting solutions and have obtained ASME Quality and ISO 9001:2008 Certifications.

To fulfill the need for leak-free gas and fluid containment, our tube fittings are the ideal solution.

 

 

 

Hylok fittings are manufactured to exacting tolerances in a variety of materials including stainless steel, steel, brass and alloys in fractional and metric sizes. Hylok two ferrule tube fittings are fully interchangeable with other two ferrule brands of the same design such as Swagelok, Parker-Hannifan, Ham-Let, SSP etc. and provide a cost effective solution to liquid and gas containment. Additionally, Hylok flare, pipe, UHP, weld, and face seal fittings provide the same attention to tolerances, materials, design while being very price competitive.

Hylok Fittings:

  • Tube Fittings
  • Precision Pipe Fittings
  • Face Seal Fittings
  • High Purity Fittings
  • Socket and Butt Weld Fittings
  • Chromatograph Fittings
  • Hose Barb
  • O-ring Seal Fittings
  • 37 Degree Flare Fittings

 

 

 

JUAL HY-LOK INSTRUMENT FITTINGS & VALVES

 

Hy-Lok is an industry leader in the fabrication and sale of high quality fluid system components.

Hy-Lok supports a broad inventory of standard and non-standard valves, fittings, semiconductor components and hydraulic presetting tools. Hy-Lok continues to push the envelope with new product development, carefully considering customer specifications like pressure, temperature, fluids, flow rate, environment and budget. We are always happy to answer inquiries for the availability or development of any specific valve or fitting.

 

Hy-Lok supports a broad inventory of standard and non-standard Fittings ,Valves and Package Solution.

Products

 

Fittings

Hy-Lok Fittings have been used in most of the industrial fields and supplied to well-known end users in the world on the basis of the best quality and reliable and wide technology

Valves

Hy-lok Instrument Valves & Manifolds and Double Block Bleed & Piping Ball Valves have been highly recognized by customers through the safety, reliability and corrosiveness to meet the severe installation condition such as offshore and power plant

 

Package Solution

Hy-Lok has designed and manufactured customized Package Solution such as air manifolds, Air Piping Module for Train Brake System and Instument Panel operated in power plant.

 

 

 

 

 

 

 

HYLOK INSTRUMENT TUBE & PIPE FITTINGS

 

Hy-Lok USA, Inc. tube and pipe fittings provide leak-free connections for instrumentation, pneumatics, hydraulics, fluid delivery systems and other related industries.

With over 30 years’ experience providing fitting solutions for a wide variety of applications, our products are guaranteed to be dependable and help you achieve the highest degree of efficiency.

Each of the fitting types provided by Hy-Lok is tailored to the exact requirements of your application. Our large inventory of JIC flare fittings, weld fittings, calibration, high pressure cone and thread fittings are all thoroughly tested for maximum quality control before it reaches our customers.

 

 

 

Fittings

Hy-Lok tube and pipe fittings provide leak-free connections for instrumentation, hydraulics, fluid delivery systems, and other related industries.

Hy-Lok Tube Fittings

Hy-Lok’s flareless tube fittings feature a two-ferrule design that compensates for tolerances in tube O.D. and range in tube size from 1/16″ to 2″ (2mm to 38mm).

  • Tube to Tube Union
  • Tube to Male Pipe
  • Stub Tube Connector
  • Tube to An Tube
  • Tube To SAE/MS O-Ring
  • Tube To Weld End
  • Plug and Cap
  • Spare Parts

 

37° Flare JIC

Hy-Lok’s rugged and compactly designed needle valves offer a wide range of sizes, configurations, end connections, pressure and temperature ratings.

  • Union / Union Elbow
  • Union Tee / Union Cross
  • Weld/Female Bulkhead Union
  • Male Run Tee
  • Female Branch Tee
  • O-Ring Seal Run Tee (UNF)

 

DIN 2353

Hylok DIN 2353 is available in brass, carbon steel, and stainless steel with a size range of 4mm to 42mm combined with a wide selection of configurations.

 

JIS Bite Type

Hy-Lok single ferrule bite type design is available in many connections and configurations. Standard materials are carbon steel, brass and stainless steel. Sizes range from1/8” thru 2”.

 

Weld Fittings

Hy-Lok weld fittings range from 1/8” T to 1” T for tube to tube configurations and 1/8” NPT to 1” NPT for tube to male and female pipe configurations

  • Instrument Weld Fittings
  • Micro Weld Fittings

 

ZCO O-Ring Face Seal Fittings

Made up of three basic components: female nut, gland, and body. The body contains a viton o-ring which is standard. Other o-ring materials are available on request.

  • Nuts
  • Glands
  • Bodies

 

ZCR Face Seal Fittings

Metal gasket seal meets or exceeds specifications of the semiconductor industry, for tube connections to 1” O.D. Hy-Lok ZCR fittings have been tested to hold and exceed a leak rate of 10-9 torr.

  • Nuts
  • Union, Elbow, Tee, Connectors
  • Swivel Union, Elbow, Tee, Connectors
  • Nut, Cap, Plug & Gasket
  • High – Flow Connections

 

High Pressure Cone and Thread Fittings

Offering the capability to reach extreme high pressures up to 60,000 PSI, fitting designs include medium and high pressure, with a Sour Gas option.

 

Instrument Thread NPT Fitting

Hy-Lok precision machined pipe fittings are used for instrumentation and process control. Standard materials are 316 stainless steel, brass and carbon steel. Sizes range from 1/8” thru 2”.

  • Elbow
  • Street Elbow
  • Reducing Street Elbow
  • Male Tee
  • Adapter (Female NPT to male ISO tapered)
  • ISO Parallel Gasket

 

Calibration Fittings

Hy-Lok calibration fittings allow quick access to various differential pressure (DP) transmitters for calibration. Standard body material is 316 stainless steel, available in 1/4″ or 5/16″ dimensions.