Oliver Valve 5 Valve Manifold

 

In addition to the standard isolation needle valve, Oliver valves can provide 2, 3 and 5 valve manifolds for both remote and direct mounting to pressure gauge and pressure differential transmitters. These manifold valves are, as standard rated to 413bar (6000psi) and are available in a range of different materials. Our Needle Valve Manifolds are available in numerous different configurations – including pipe-to-pipe, pipe-to-flange and flange-to-flange.

To date, our needle valve manifolds have been used all over the world on both small scale and large scale Oil, Gas and Petrochemical projects.

Our customers also benefit from our Needle Valve Manifolds being supplied with mounting bolts and seal rings. In the past, customers have used our Y34 and YV34 manifolds to mount onto Rosemount transmitters and other applications. As with most of Oliver Valves’ range of Needle Valves, we are able to work closely with our customers to design and engineer bespoke manifolds that fit into both new and existing projects.

 

Oliver Valve ‘Y53’ Type 5 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation and vent for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble tight shut off, with non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.We typically keep 5 valve manifolds in stock.

Needle Valve Manifold Specifications:
PSI Rating	Rated to 4,800 PSI as standard.
Configurations	Pipe-to-Pipe, Pipe-to-Flange and Flange-to-Flange
Valve Configurations	Two Valve, Three Valve and Five Valve configurations
Mounting Options	Both remote and direct mounting available

Key Features

 

– Non rotating tip – self centering & anti-galling
– Piston ring – gives dynamic adjustment of gland seal in response to pressure change
– Anti-blow out spindle – a major safety feature
– Secure seal – precision machined to give leak free operation for the life of the valve. Available
in either PTFE or Grafoil

Standard Specification

 

Pressure: 4800psi
Temp: 240 deg C
Packing: PTFE
Seat: Metal to Metal
Handle: T-Bar
Bore: 0.21″ (5.4mm)
CV: 0.46
Connections: 1/2″ Inlets
Supplied with 4x M10 bolts (7/16″UNF also available) and 2x PTFE/Grafoil seal rings

 

Key Features

• Non rtation tip – self sentering and anti-galling
• Piston ring – gives dynamic adjustment of gland seal in repsonse to pressure change
• Anti-blow out spindle – a major safety feature
• Secure seal – precision machined to give leak free operation for the life of the valve

 

Direct mounting five valve manifolds manufactured from 316 stainless steel. The five head units are of the inside screw and rising stem design, screwed and pinned bonnet with adjustable PTFE gland packing.

• T-bar handle operation
• Non-rotating tip giving metal-to-metal hard seat.
• The maximum pressure rating is 6,000 psi with the maximum temperature rating being 240 ºC at reduced pressure.
• Female inlet connections as Standard.
• Vent is 1/4” NPT unplugged.
• Flanged 54mm centres oulet connections as Standard.

 

Specifications:

• 1/2″ Female NPT X 1/2″ Flange
• Max Pressure 4,800PSI
• 2 Mounting holes to mount bracket
• 316 Stainless Steel Material
• Metal to Metal Seat
• PTFE Packing
• NACE MR-01-75 latest revision